EU Project
EU Project
1995-1997
"Interpretation of wastage mechanisms of materials exposed to elevated temperature erosion-corrosion using erosion-corrosion maps and computer graphics", M.M. Stack and L. Bray, Wear, 186-187, 273-283, 1995.
"Computer simulation of erosion-corrosion by solid particles at elevated temperatures", M.M. Stack, Q. Song-Roherle, F.H. Stott and G.C. Wood, Wear, 181-183, 516-523, 1995.
"A mathematical model for sliding wear at elevated temperatures", Jiaren Jiang, F.H. Stott and M.M. Stack, Wear, 181-183, 20-31, 1995.
"The erosion of functionally graded coatings under fluidized bed conditions", G. Heath, M.M. Stack, M. Rehberg and P. A. Kammer, Proc. 3rd Int Conf. on Structural and Functional Gradient Materials, 10-12 October 1994, Pub. EPFL-Ecublens, 511-518, 1995.
"Elevated temperature erosion resistance of Ni-based Functionally Graded Materials", M.M. Stack, J. Chacon-Nava and M. Rehberg, Proc. 2nd International Conference on Heat Resistant Materials, Gatlinberg, U.S., 11-15 September 1995, 445-452, Pub. ASM 1995.
"Relationship between the effects of velocity and alloy corrosion resistance in erosion-corrosion environments", M.M. Stack, J. Chacon-Nava and F.H. Stott, Wear, 180, 91-99, 1995.
"Synergism between the effects of velocity and temperature for Fe-Cr alloys in fluidized bed erosion-corrosion conditions", M.M. Stack, J. Chacon-Nava and F.H. Stott. Materials Science and Technology, 11, 1180-1185, 1995.
"The erosion-corrosion of alloys under oxidizing-sulphidizing conditions at high temperatures", F.H. Stott, M.P. Jordan, S. Lekatos and M.M. Stack", Wear, 186-187, 291-298, 1995.
"The interactions of sulphidation and particle erosion at elevated temperatures", F.H. Stott, M.P. Jordan, S. Lekatos, G.C. Wood, and M.M. Stack, Werkstoffe und Korrosion, 46, 261-270, 1995.
"Identification of transitions in aqueous erosion-corrosion regimes using electrochemical techniques", M.M. Stack, S. Zhou and R.C. Newman, Wear, 186-187, 523-532, 1995.
"Mechanisms of erosion-corrosion of alloys and ceramics in dry and in aqueous conditions", M.M. Stack, Proc. Workshop on Corrosion in Alumina Plants, Available from Alcan U.K., 6-8 June 1995.
"Erosion-Corrosion "regimes": Number, Nomenclature and Justification?", M.M. Stack, S. Lekatos and F.H. Stott, Tribology International, 28, 7, 445-451, 1995.
"Optimization of aqueous erosion-corrosion parameters using erosion-corrosion maps for erosion-corrosion in aqueous slurries", M.M. Stack, N. Corlett and S. Zhou, International Tribology Conference, Yokahama, Japan, 29 October-2 November, 1995.
"A mathematical model for sliding wear at elevated temperatures", Jiaren Jiang, F.H. Stott and M.M. Stack, Wear, 181-183, 20-31, 1995.
"Identification of transitions in erosion regimes for the erosion of metal matrix composites at elevated temperatures", M.M. Stack, D. Peña and J. Chacon-Nava, Proc. 2nd International Conference on Composites Engineering, 707-708, Pub. Dept. Mechanical Engineering, Univ. New Orleans, Ed. D. Hui, New Orleans, 21-24 August 1995.
"Construction of erosion-corrosion maps for erosion in aqueous slurries", M.M. Stack, N. Corlett and S. Zhou, Materials Science and Technology, 12, 8, 662-672, 1996.
"Erosion-corrosion mapping in dry and in aqueous conditions: review of recent developments", M.M. Stack, Corrosion Engineering(Japan), 45, 551-559, 1996.
"Elevated temperature erosion of a range of composite layers of Ni-Cr based functionally graded material", M.M. Stack, J. Chacon-Nava and M.P. Jordan, Materials Science and Technology, 12, 171-177, 1996.
"Effects of particle velocity and applied potential on the erosion of mild steel in a carbonate/bicarbonate slurry", M.M. Stack, S. Zhou and R.C. Newman, Materials Science and Technology, 12, 3, 261-268, 1996.
"Temperature and volume fraction effects on the erosion-oxidation of Ni-Cr/WC metal matrix composites", M.M. Stack and D. Peña, Microscopy of Oxidation 3, 757-765 Eds. S.B. Newcomb and J.A. Little, 1996.
"Construction of erosion maps for erosion of MMCs and FGMs at elevated temperatures", M.M. Stack and D. Peña, Proc. International Conference on Corrosion, Melbourne, Australia, 25-29 November 1996, Pub. ACA, Clayton Australia, paper 193, 11, 1-7, 1996.
"Evaluation of the synergistic effects of erosion and corrosion in aqueous nvironments using electrochemical techniques", S. Zhou, M.M. Stack and R.C. Newman, Corrosion, 52, 12, 934-946, 1996.
"Electrochemical studies on anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions", S. Zhou, M.M. Stack and R.C. Newman, Corrosion Science, 38, 7, 1071-1084, 1996.
"An approach to defining erosion-corrosion regimes for erosion in aqueous slurries", M.M. Stack, S. Zhou and R.C. Newman, Proc. International Conference on Corrosion, Melbourne, Australia, 25-29 November 1996, Pub. ACA, Clayton Australia, paper 191, 11, 1-9, 1996.
Book Review of "Fretting and Fatigue", Eds. Waterhouse and Lindley, M.M. Stack, Pub. ESIS. Tribology International, 29, 1, 88-89, 1996.
"The high temperature erosion-corrosion behaviour of industrial thermal sprayed coatings", G. Heath, P. Kammer and M.M. Stack, Proc. NTSC' 96, 7-11 October, Cincinnati, Ohio, U.S.
"Some issues relating to the construction of materials selection maps for resistance to elevated temperature erosion", M.M. Stack, Tribology International, 30, 6, 435-444, 1997.
"Optimizing the performance of materials in FBC conditions using erosion-corrosion wastage and materials performance maps", M.M. Stack, Materials at High Temperatures, 14, 3, 313-324, 1997.
"Modelling the beneficial effects of oxidation on the sliding wear of metals and alloys", F.H. Stott, Jiaren Jiang, and M.M. Stack, Advances in Surface Engineering 3, (Pub. Roy. Soc. Chem.), 1, 143-157, 1997.
"A methodology for the construction of the erosion-corrosion map in aqueous environments", M.M. Stack, N. Corlett and S. Zhou, Wear, 203-204, 474-488, 1997.
"Effect of partial pressure of oxygen on the tribological behaviour of a Ni based alloy N80A at elevated temperatures", Jiang Jiaren, M.M. Stack and F.H. Stott, Wear, 203-204, 615-625, 1997.
"Characterization of wear scar surfaces using combined three dimensional topographic analysis and contact resistance measurements", Jiaren Jiang, F.H. Stott and M.M. Stack, Tribology International 30, 6, 517-526, 1997.
"Solid particle erosion of Ni-Cr/WC MMCs at elevated temperatures: construction of erosion mechanism and process control maps", M.M. Stack and D. Peña, Wear, 203-204, 489-497, 1997.
"Surface engineering of composites and graded coatings for resistance to solid particle erosion at elevated temperatures", M.M. Stack and D. Peña, Proc. Advances in Surface Engineering, 111, 236-252, 1997.
"Approaches to constructing materials performance maps for exposure to elevated temperature erosion", M.M. Stack and D. Peña, Proc. World Tribology Congress, 222, Pub. Bookcraft LTD 5-9 September 1997.
"Effects of velocity and applied potential on the erosion of TiN based PVD coatings in aqueous slurries", H.W. Wang and M.M. Stack, Proc. World Tribology Congress, 215, Pub. Bookcraft LTD, Bath U.K., 5-9 September 1997.
"The role of triboparticulates in dry sliding wear", Jiaren Jiang, F.H. Stott and M.M. Stack, Proc. World Tribology Congress, 135, Pub. Bookcraft LTD, Bath U.K., 5-9 September 1997.