"The role of oxides in the erosion-corrosion of alloys in low velocity conditions", F.H. Stott, M.M. Stack and G.C. Wood, Corrosion-Erosion-Wear of Materials at Elevated Temperatures, 12, 1-16, Pub. NACE, Houston, 1991.

​

"Erosion-corrosion of pre-oxidized Incoloy 800H in fluidized-bed environments: effects of temperature, velocity and exposure time, M.M. Stack, F.H. Stott and G.C. Wood, Materials Science and Technology, 7, 1128-1137, 1991.

​

"Effect of pre-oxidation on the erosion-corrosion of Incoloy 800H in fluidized bed environments", M.M. Stack, F.H. Stott and G.C. Wood, Heat Resistant Materials, ASM, Ohio, U.S.A, 333-342, 1991.

​

"Erosion-corrosion of pre-oxidized and as-received alloys: effects of impact angle, temperature and hot hardness", M.M. Stack, F.H. Stott and G.C. Wood, Materials at High Temperatures, 9, 3, 153-159, 1991.

​

"The influence of chromium on the erosion-corrosion of alloys in fluidized bed conditions", F.H. Stott, K.K. Tiong, and M.M. Stack, EuroCorr 91, 282-287, 1991.

​

"Erosion-corrosion mechanisms in fluidized bed environments", M.M. Stack, F.H. Stott and G.C. Wood, Materials for Combined Cycle Power Plant, 253-261, Pub. Institute of Materials, 1991.

​

Published report on "Modelling of erosion-corrosion processes in energy conversion systems", J.R. Nicholls, D. Stephenson, M. Polden, J.F. Norton, M. Gandry, F.H. Stott, R. Prescott, M.M. Stack, G. Wouters, W. Englen, W. Debruyen, F. Casteels, Summary Report, Contract No. EN3F-0027-B, May 1991, Available from the Commission of European Communities, Brussels, Belgium.

​

"Computer simulation of the effect of pre-oxidation in erosion-corrosion environments", M.M. Stack, F.H. Stott and G.C. Wood, Journal of Physics D: Applied Physics, 25, A170-A176, 1992.

 

"Computer simulation of the synergistic effects of erosion and corrosion", M.M. Stack, F.H. Stott and G.C. Wood, Key Engineering Materials, 72-74, 31-47, Pub. Trans. Tech. Switzerland, 1992.

​

"Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures", M.M. Stack and F.H. Stott, Oxide Films on Metals and Alloys, 92-22, 589-600, Pub. Electrochem. Soc., 1992.

​

"Effect of pre-oxidation of chromia and alumina forming alloys when eroded in laboratory simulated fluidized bed conditions", M.M. Stack, F.H. Stott and G.C. Wood, Corrosion Science, 33, 6, 965-983, 1992.

​

"Computer simulation of the interaction of erosion-corrosion with alloys at elevated temperatures", M.M. Stack and F.H. Stott, Proc. Fall Electrochem. Soc. Meeting, Toronto, October 1992.

​

"The effect of hardness on the erosion-corrosion of materials in low velocity conditions", J. Chacon Nava, F.H. Stott and M.M. Stack, Corrosion Science, 35, 5-8, 1045-1051, 1993.

​

"The significance of velocity exponents in identifying erosion-corrosion mechanisms", M.M. Stack and F.H. Stott, Journal de Physique, Colloque C9, Supplement au Journal de Physique 111, 3, 687-694, 1993.

​

"Characterization of erosion-corrosion regimes using erosion-corrosion maps", M.M. Stack, F.H. Stott and G.C. Wood, Surface Engineering, 11, 31-42, 1993.

​

"An approach to modelling erosion-corrosion of alloys using erosion-corrosion maps", M.M. Stack and F.H. Stott, Corrosion Science, 35, 5-8, 1027-1034, 1993.

​

"Identification of transitions through erosion-corrosion regimes using erosion-corrosion maps", M.M. Stack and F.H. Stott, Advances in Materials and Process Technologies, 111, 2211-2218, Pub. Dublin City University Press, 1993.

​

"The use of erosion-corrosion maps to characterize erosion-corrosion by slurries", M.M.Stack, Proc. First International Symposium on Process Industry Piping, 37, 1-13, Pub. NACE, Houston, 1993.

"Review of mechanisms of erosion-corrosion at elevated temperatures", M.M. Stack and F.H. Stott, Wear, 162-164, 706-712, 1993.

​

"Some frictional features associated with the sliding wear of a nickel based alloy, N80A, at temperatures to 250oC." Jiaren Jiang, F.H. Stott and M.M. Stack, Wear, 176, 185-194, 1994.